EBS MicroBass 3 — popust 21%

O izdelku

The EBS-MB3 is a preamp with two channels, produced using high-end materials and parts. You’ll have plenty of headroom to play with as the preamp works at a signal level that is equal to a pro mixing console. This higher signal means you can use it as a preamp alongside any type of standard power amp. Useful Built-In Tools A number of in-built features separate the EBS-MB3 from the rest. The two contrasting channels (drive and clean) can be used either parallel or in series. The dual balanced XLR-Outputs can tap the signal post and pre-EQ simultaneously, while 10 M Ohms of Input Impedance let it handle absolutely any kind of bass. An onboard tuner means you can tune without needing another device. This is a seriously versatile piece of kit! Features Professional, Analogue Preamp Dual Channels (Overdrive & Clean) Blend Control (for Drive) Run Either in Parallel or Series Dual Balanced XLR-Out (Pre & Post EQ or Stereo) Effects Loop (Mono or Stereo) – Running in Stereo Mode the Balanced Outputs Become Left & Right Output Character and Bright Filters (Clean Channel) HI or LO Gain Drive Engines Thin or Deep Type (Drive Channel) Onboard Compressor Tuner, Aux Input Headphones Out 10 M Ohms Input Impedance 9V DC, 450 mA Required (Power Supply is Included) Specifications General: Weight: 660g (1.5lbs) Dimensions (W x D x H): 6.6" x 4.9" x 2.1" Aux Info: Power Requirements: Idle 450mA @9V. Max 750mA @ 9V (with Headphones at Max Output Level Balanced Outputs: Options: Pre/Post EQ, L/R Channel in Stereo Mode XLR Connections: 1-GND, 2-Hot, 3-Cold Output Level: Nominal -20dBv Output: Output Impedance: Signal Level: Nominal 0 dBv Aux Input: Input Impedance: 20 k Ohms Nominal Level: -10 dBv Phones Out: Recommended Impedance: 32 – 200 Ohms Effects Loop: Input Impedance: > 200 k Ohms // 22 pF Output Impedance: Gain: Unity (1:1) Loop Signal Level: Nominal -10 dBv Drive Channel: Input: Input Impedance 1.8 M Ohms // 22 pF Drive: Gain Range 40 dB Engines: Lo: Type 2 nd Harmonics Soft, Hi: Type Symmetrical 2-Stage with +18 dB Gain Type: Thin/Normal/Deep Pre-Drive EQ Filter Section: Tone Filter: Type 6 dB/Oct. Low Pass. Frequency Range 700-20k Hz. Middle Filter: Type Bandpass Filter. Frequency Range 100 – 4.500 Hz. Q 1.2, Gain Range +/- 15 dB Clean Channel: Input Impedance: Parallel Mode 1.5 M Ohms // 44 pF, Serial Mode 10 M Ohms // 22 pF Gain: Gain Range min/max -00/ +30 dB, Gain Peak LED +10 dBv, Frequency Response +0 / -3 dB 20 – 20.000 Hz Character: Filter Type: Shelving High/Low Pass Gain: Lo +6 dB @ 80 Hz, Mid -2 dB @ 900 Hz, Hi +3 dB @ 7.5 kHz Bright: Filter Type Shelving: Gain +10 dB @ 10 kHz Filter Section: Bass Filter: Type 12 dB/oct. Shelving. Gain Range +/- 18 dB @ 60 Hz Middle Filter: Type Bandpass Filter. Freq Range 50 – 5.000 Hz. Q -Boost 0.5 – 1.3, Q – Cut 0.5 >5. Gain Range +/- 12-15 dB Treble Filter: Type Shelving. Gain Range +/- 18 dB @ 8 kHz Comp/Limit: Comp Gain 0 Db. Attenuation Max 24 dB, Compression Ratio Max 3:1, Attack (80%) typ